Description
QUICK START
1 Install a 9-Volt Batter y [not included]
2 Enter 1-2-3-4-5-6-7-8-#
3 Turn handle before the green
light turns off
4 To lock your safe, close door & turn handle back to the locked
position
IMPORTANT : Always make sure your safe is locked before walking away!
If your code is correct a green light will turn on for approximately 5 seconds
& you will also hear a ‘Click’
If the code is incorrect, a red light will turn on, followed by 5 ‘Beeps’
NOTE : Be sure to press firmly & ONLY use your finger tips to press the keys on the keypad. DO NOT USE your finger nail, a pen, etc. This will damage the keys.
BASIC FEATURES & FUNCTIONS
6 User Codes available : Master, User 1, User 2, User 3, User 4, & User 5
NOTE : Avoid confusion - keep notes on which code belongs to which user.
If 4 incorrect codes are entered consecutively, the keypad will shut down
for a period of 5 minutes. During this shut down period the keypad will not accept any codes
Programmable time delay function can be set from 01 minutes to 59 minutes
Optional dual user mode, in this mode two seperate codes will need to be entered to unlock the safe
